AgList AI

Chat with AgList AI.

Loading AgList AI

The product record

Products (16)

Showing 1-16 of 16

  1. Vegalab Spider Mite Control product imageVegalabVegalab Spider Mite ControlNo endorsements yetAmplified Natural Terpenoid Control of Spider Mites Spider Mite Control is a plant extract pesticide used to control spider mites, which are known to feed on several hundred species of plants. The plant oil extracts disrupt the breathing of spider mites and also prevent laid eggs from hatching. Spider Mite Control is a safe, all-natural alternative to conventional pesticides and does not cause resistance development after continuous use. Pests Targeted Spider mites are Acari of the family Tetranychidae, which includes a wide number of species. They generally live under plant leaves, which get damaged when the spider mites feed on them. They are quite small and they lay eggs, which can also cause plant damage after hatching. They attack a large variety of plants such as tomatoes, peppers, potatoes, beans, corn, strawberry, etc. Damaged plants show small light flecks. Spider Mites can become a pest when insecticides kill their natural predators. In high populations, they produce webbing to protect themselves and their eggs. A single mature female can spawn about one million mites in approximately one month. Their accelerated reproductive rates allow spider mites to quickly adapt to chemical pesticides and become resistant. Application To apply Spider Mite Control during a spider mite outbreak, use 0.256 oz of product with one gallon (1 gal.) of water to dilute. It can also be used in other quantities, respecting the dilution rate of 1:500 product to water. After dilution, spray the product onto the plant leaves above and below. Do not apply prior to excessive rains, since this may reduce product effectiveness. Apply again in event of rain. Apply every 3-5 days. Avoid applying product during peak sunlight as oil-based products may cause phytotoxic effects. Active Ingredients Spider Mite Control uses natural cottonseed, peppermint, and rosemary oil extracts, in combination with geraniol, as the active ingredients to reach the highest level of efficacy, while greatly reducing the environmental impact of using this product. Spider Mite Control kills spider mites effectively on contact (direct toxicity). The oils biodegrade naturally under warm conditions and do not leave any harmful residues behind. A foliar spray on the leaves of plants will control various insects for several days. Geraniol is also an effective insect repellent. Safety & Environmental Info The oil extracts from plants used in this product are non-toxic to humans and rapidly biodegrade under warm conditions, meaning they do not leave harmful residues. This product is not leachable from soil. Appropriate land management practices should be used at all times with any pesticide; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Spider Mite Control blocks the breathing holes of spider mites, so they die by suffocation. It also deactivates the eggs and prevents hatching. Spider Mite Control also causes reproductive disruption among female spider mites, leading to infertility or mites that don't develop to an adult stage.BiocontrolBiopesticides
  2. Vegalab Nematode Control product imageVegalabVegalab Nematode ControlNo endorsements yetPowerful Natural Control of Parasitic Nematodes Nematode Control is our next generation nematicide built around our patented, proprietary nanotechnology. Compatibility testing on a wide range of crops including tomatoes, cucumbers, melons, strawberries, and watermelons show over 80% efficacy using this product. Nematode Control has been proven to significantly impact the population of parasitic nematodes species including, but not limited to, root knot, burrowing, lesion, pin, and spiral. Application For the prevention of nematode infestation, mix 3.8 ml (3/4 tsp) of product with one gallon (1 gal) of water to properly dilute Nematode Control. For area applications, use 67.6 oz per acre of land via soil irrigation. If nematode infestation already exists, then mix 7.6 ml (1 1/2 tsp) of product with one gallon (1 gal) of water to properly dilute Nematode Control. For area applications, use 1.1 gallons per acre of land via soil irrigation. After dilution, irrigate the product onto the soil. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Nematode Control uses the natural extract geraniol as the active ingredient to reach the highest level of efficacy, while greatly reducing the environmental impact of using this product. Geraniol is our best recommendation for natural control of plant parasitic nematodes. Safety & Environmental Info Avoid contact with skin and eyes, and do not drink. Handling and storage requirements: product should be stored in a dry, cool place (0-35°C). Biodegradability of the product has not been determined, so avoid disposing of the product into drainage systems and into the environment. Appropriate land management practices should be used at all times with any pesticide; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Nematode Control minimizes root knots and egg hatching of phytonematodes by disrupting their feeding and reproduction. It also minimizes the effects of soil pathogens and various impediments caused from soil and climate factors. Nematode Control enhances plant disease resistance and stimulates root growth and plant health. Nematodes, or roundworms, comprise a diverse group of parasites. They are ubiquitous in freshwater, marine, and terrestrial environments, as they are able to adapt very well to different environmental conditions. They are the most numerous multi-cellular animals on earth. Some nematodes are beneficial to plant growth, but others are detrimental. Nematode Control targets the harmful nematodes, which attack plants and serve as carriers for plant viruses in crops. Mix Rate The mix rate for Nematode Control is 0.13 fl oz (3/4 tsp.), or 3.8 ml per 1 gallon of water, or 1 gallon of product per 1,000 gallons of water for prevention of disease symptoms. If the nematode infection exists, the mix rate is 7.6 ml per gallon or water, or 1 gallon of product per 500 gallons of water.BiocontrolBiopesticides
  3. Vegalab Calcium Boost product imageVegalabVegalab Calcium BoostNo endorsements yetAdvanced Soluble Calcium Fertilizer Supplement Calcium Boost contains calcium to quickly replenish any and all calcium deficiencies in a crop. It can be used to prevent excessive growth and can add rigidity to the plants cellular membranes. It also prevents physiological disorders such as fruit cracking. Efficacy - Effective at treating calcium deficiencies. - Effective at promoting root development and strengthening the plant’s cellular membrane. Application Use Calcium Boost to effectively correct a crops calcium deficiencies by adding 4.7 - 7.6 ml (1 to 1 1/2 tsp) of product with one gallon (1 gal) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plant’s life cycle, respecting the dilution rate of 1:800 to 1:500; product to water. After dilution, use as a foliar spray 2 - 3 times to replenish plant stores of calcium. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Calcium Boost contains moderate amounts of calcium with amino acids, organic acids, and pyroligneous liquor. Safety & Environmental Info This product is made from naturally derived ingredients and is non-toxic. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Calcium Boost is a concentrated form of calcium intended to correct calcium deficiencies or for crops that have specific calcium requirements. The quicker absorption of calcium facilitates the strengthening of cellular membranes. Calcium is also known to promote root growth and increase the development of cellular membranes. It also helps prevents physiological disorders such as bitter pit, blossom-end rot, brown rot, new shoot death, and fruit cracking.Crop & Soil HealthBiofertilizers
  4. Vegalab Brix Boost product imageVegalabVegalab Brix BoostNo endorsements yetNatural Sugar and Brix Enhancer Brix Boost is a fruit-sweetening fertilizer meant to improve the overall taste of fruit through enhancing the quality of fruits and vegetables. These compounds are used to improve brix levels and enhance the quality of fruits and vegetables. Efficacy - Effective at improving the overall quality of the crop. - Effective at enhancing the flavor, taste and overall development of fruits - Effective at supplying crops with a ratio in nutrients formulated for better taste of fruits. Application Use Brix Boost to enhance the sweetness and quality of crops by adding 3.8 ml (3/4 tsp) of product to one gallon (1 gal) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plants bloom cycle, respecting the dilution ratio of 1:1,000 product to water. After dilution, use as a foliar spray 2 - 3 times to achieve better quality fruits. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Brix Boost contains ample amounts of phosphorus and potassium with natural sugars, amino acids, complex carbohydrates, and micronutrients. Safety & Environmental Info This product is made from naturally derived ingredients and is non-toxic. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Brix Boost contains the proper ratios of macro- and micro- nutrients needed to enhance the sweetness and quality of flowers, fruits and/or vegetables. Brix Boost contains important macro elements responsible for crop development and maturation such as phosphorus, potassium, magnesium, and sulfur. Mannitol is a powerful chelating compound, unlocking important elements bound in the soil. Xylose is one of the only carbohydrates that are readily absorbed into the plant without further degradation. Stevioside glycoside is the compound responsible for the sweetness of the Stevia plant and is a commercial alternative to refined sugar (sucrose) from sugar cane. This substance ranges from 50 - 300x sweeter than sucrose, naturally increasing brix levels in fruits and vegetables.Crop & Soil HealthBiofertilizers
  5. Vegalab Spore Control product imageVegalabVegalab Spore ControlNo endorsements yetNatural Broad Spectrum Control of Fungal Pathogens Spore Control is an all-natural fungicide composed of plant extracts. It is applicable as a foliar spray and has been tested on strawberries, cucumbers, tomatoes, grapes, and chili peppers. If used at the first sign of disease, it aids in disease resistance and improves crop yields. This natural fungicide is also environment friendly, as its impact to the soil and aquifers is negligible. Spore Control uses thymol as a fungicidal agent and offers a safer alternative to other, more persistent chemical pesticides that can often be dispersed in runoff and cause subsequent contamination. Pests Targeted - Effective against anthracnose on eggplants, peppers (chili & sweet), potatoes, and tomatoes. - Effective against downy mildew, especially as related to cucurbits. - Effective against wilt disease, as related to bananas, cucurbits, eggplants, geraniums, ginger, olives, peppers (chili & sweet), potatoes, tobacco, & tomatoes. - Effective against damping off (water mold), Fusarium, grey mold (Botrytis), and root rot (Phytophthora) for most fruit & vegetable crops. Application At the onset of the disease, use 3.8 mL (3/4 tsp.) of product with one gallon of water in order to dilute Spore Control. It can also be used in other quantities, respecting the dilution rate of 1:1,000 product to water. In area applications, use 6.9 oz to 10.4 oz per acre of land as a foliar spray. After dilution, spray directly on the plants leaves. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Spore Control uses thymol as the active ingredient to reach the highest level of efficacy, while greatly reducing the environmental impact. Thymol is a phenolic compound that has strong antimicrobial characteristics. It belongs to a class of compounds known as biocides and it is extracted from Thymus sp. Safety & Environmental Info Avoid eye and skin contact. Contents are hazardous in case of eye contact (irritant), ingestion and inhalation. Contents are slightly hazardous in case of skin contact (permeator). Studies have shown that thymol degrades rapidly (DT50 16 days in water, 5 days in soil) in the environment and presents a low risk because of rapid dissipation and low binding capacity of residues. The use of thymol as a pesticide agent offers a safe alternative to other more persistent chemical pesticides that can be dispersed in runoff and produce subsequent contamination. Mode of Action Spore Control has two effects on crops: preventive and curative effects. It inhibits spore germination and germ tube growth, and also destroys the pathogen cell. Thymol induces an imbalance of K+ ions inside the mycelium and halts spore germination and mycelium proliferation. It enters the pathogen cell causing cell lysis. If it is administered at the beginning of disease onset, it helps fight the disease and improves immunity of the crops.BiocontrolBiopesticides
  6. Vegalab Grow Boost product imageVegalabVegalab Grow BoostNo endorsements yetAmplified Vegetative Growth Promoter Grow Boost is a plant extract nutrient fertilizer for soil improvement and growth stimulation. It increases the populations of beneficial microbes in the soil, thereby increasing plant immunity against diseases, pests, and abiotic stress. Grow Boost also increases yield and quality of crops. Efficacy - Stimulates the growth of new branches & roots and increases quality & quantity of crops at harvest. - Improves fruit color, health, & size by virtue of aiding in nutrient absorption. - Enhances a crop’s ability to endure abiotic stress such as cold, heat, drought, and floods. - Increases the contents of beneficial microorganisms and natural antibiotics of plants, providing better protection against damage from disease, infestation, and pests. Application Use 3.8 mL (3/4 tsp) of product with one gallon (1 gal) of water to dilute Grow Boost. It can also be used in other quantities, respecting the dilution rate of 1:1000 of product onto plant leaves or irrigate the soil. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Grow Boost uses natural seaweed extracts from Ascophyllum nodosum, Sargassum spp., and Laminaria spp. These extracts go through a process that mechanically extracts the compounds within seaweed, resulting in preservation of important phytohormones, enzymes, and amino acids that stimulate plant growth. During kelp’s lifespan in the ocean, it captures minerals freely floating throughout the oceanic ecosystem, providing terrestrial plants compounds they cannot normally receive. Safety & Environmental Info Because algae can grow very rapidly in lakes, causing anoxic conditions in water, avoid disposing into drainage systems. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. This product is made from naturally derived ingredients and is non-toxic. Mode of Action Grow Boost at the rhizosphere level stimulates the growth of beneficial microoganisms, when applied to leaves, the plant quickly absorbs the nutrients needed to boost immunity. With the application of Grow Boost, adverse weather can be tolerated better because it decreases stress from abiotic factors, improves fruit size, color, and hardness, and it also increases the quality of product harvested.Crop & Soil HealthBiofertilizers
  7. Vegalab Mildew Control product imageVegalabVegalab Mildew ControlNo endorsements yetEffective and Natural Powdery Mildew Control Mildew Control is an all-natural fungicide composed of plant extracts. It is applied to the leaves & soil and is effective against Powdery Mildew and other mildew diseases in the order Erysiphales. These mildews are known to significantly reduce crop yields. Pests Targeted - Effective against Podosphaera fusca, the powdery mildew found on cucumbers, luffas, melons (including watermelons), and squashes (including pumpkins). - Effective against Erysiphe necator, the powdery mildew endemic to grapes. - Effective against Podosphaera leucotricha, the powdery mildew that affects both apples and pears. - Effective against Podosphaera aphanis, the powdery mildew commonly found on rosaceae, such as blackberries, raspberries, and strawberries. - Effective against Oidium lycopersicum, the powdery mildew of tomatoes. Application Apply Mildew Control at the beginning of disease onset, mixing 3.8 mL (3/4 tsp.) of product with one gallon (1 gal.) of water to dilute Mildew Control, unless otherwise specified in the table below. It can also be used in other quantities, respecting the dilution rate of 1:2,000 product to water. After dilution, spray the product onto plant leaves. In area applications, use 5.1 oz per acre of land as a foliar spray. Do not apply prior to excessive rains, since this may reduce product effectiveness. Avoid applying product during peak sunlight as oil-based products may cause phytotoxic effects. Active Ingredients Mildew Control uses the natural plant extract geraniol as the active ingredient to reach the highest level of efficacy, while greatly reducing the environmental impact of using this product. Geraniol is a fungicide with preventative & curative effects against powdery mildew that deactivates the growth of spores and consequently reverses disease progress. Safety & Environmental Info Irritant to skin and eyes; product is composed of natural oils and is non-toxic. Appropriate land management practices should be used at all times with any fungicide; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Mildew Control has a twofold effect on crops: preventative and curative. It retards spore germination, germ tube growth, and destroys pathogen cells. Geraniol induces an imbalance in levels of the K+ ions inside the mycelium; this also helps to slow spore germination and mycelium proliferation. It enters the pathogen cell causing cell lysis. Mildew Control is most effective when applied before the onset of the disease.BiocontrolBiopesticides
  8. Vegalab Root Boost product imageVegalabVegalab Root BoostNo endorsements yetNatural Metabolic Root Accelerator Root Boost is a plant growth promoter formulated with root-enhancing compounds to supply adequate macro- and micronutrients to soils. It enhances root growth, plant growth, fruit size and crop yields due to the presence of natural root growth promoting compounds. Efficacy - Effective at increasing root mass and root growth. - Promoting crop resistance to stresses through rhizosphere stimulation. - Effective at enhancing root functions. Application Use Root Boost throughout the entire vegetative cycle and early stages of the flowering cycle on flowering/fruiting plants by adding 3.8 - 4.7 ml (3/4 – 1 tsp) of product with one gallon (1 gal) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plant flowering period, respecting the dilution rate of 1:1,000 to 1:800; product to water. After dilution, irrigate the soil around the base of the plant or apply as a foliar spray 2 - 3 times during vegetative growth into early fruiting. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Root Boost contains calcium nitrate, which supplies two critical nutrients to your crops: nitrogen and calcium. It also contains Sargassum (soluble seaweed) and microelements beneficial to root health. Safety & Environmental Info This product is made from naturally derived ingredients and is non-toxic. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Root Boost contains a mixture of important macro, secondary, and micronutrients, plus essential bio-stimulants from brown seaweed. It also assists in the transport of important carbohydrates and proteins throughout the plant. Seaweed extract contains powerful phytohormones that promote cellular division and growth, as well as root branching and mass.Crop & Soil HealthBiofertilizers
  9. Vegalab Kelp Boost product imageVegalabVegalab Kelp BoostNo endorsements yetAmplified Natural Microbial Food for Fast Growing Plants Kelp Boost is a natural, soluble seaweed fertilizer that significantly improves the transplanting success of seedlings, bare root plants and the survival of other tender plants. Through the introduction of naturally occurring auxins, cytokinins, and phytohormones, Kelp Boost helps in the production of more noticeably vigorous plants with sturdy and well-developed root systems using nutrients that are found in sea vegetation. Efficacy - Stimulates photosynthesis. - Promotes flowering & fruit set. - Improves soil properties (percolation, cation exchange capacity) and helps to maintain an optimal pH level. - Provides essential elements for crop growth. Application Kelp Boost can be applied to soil via irrigation before and after planting to promote active root development in crops. Use 3.8 ml (3/4 tsp) of product with one gallon (1 gal) of water to dilute Kelp Boost. It can also be used in other quantities, respecting the dilution rate of 1:1,000 of product to water. After dilution, irrigate the product into the soil. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Kelp Boost contains the extracts of three brown kelps. These extracts go through a process that mechanically extracts the compounds within seaweed resulting in preservation of important phytohormones, enzymes, and amino acids that stimulate plant growth. Brown kelp extracts play a vital role in maintaining soil fertility and achieving higher crop yields through the supply of natural growth promoting compounds. Safety & Environmental Info Because algae can grow very rapidly in lakes, causing anoxic conditions in water, avoid disposing into drainage systems. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. This product is made from naturally derived ingredients and is non-toxic when used as directed. Mode of Action Kelp Boost functions as a natural biostimulant, providing the plant with important phytohomones that signal the plant to rapidly grow. Indole precursors function as natural root accelerants, providing a larger root mass to increase the amount of water and nutrients the plant can absorb. The seaweed extract contained achieves faster growth rates via cytokinin-auxin signaling. At the rhizosphere level, seaweed stimulates the growth of beneficial microorganisms that aid in nutrient absorption and protects the plant/crop from pathogens. Seaweed also promotes plant restoration from abiotic stress as well, increasing environmental stress immunity.Crop & Soil HealthBiofertilizers
  10. Vegalab Charge BioBoost product imageVegalabVegalab Charge BioBoostNo endorsements yetPowerful Living Soil Bacterial Inoculant Charge BioBoost is a proprietary formulation of beneficial bacteria and saprophytic fungi (de-composers). These species of living-soil beneficial organisms have the ability to create bioavailable nutrition using only waste from the plant and soil. Using Charge BioBoost lets you reduce fertilizer applications, as the plant is able to increase the intake of nutrients from the mineralization and immobilization functions performed by bacteria that help fix and/or solubilize nutrients. Efficacy Charge BioBoost has the following benefits for crops: - Maximizes nitrogen and phosphorus intake. - Promotes resistance to foreign pathogens. - Promotes root stimulation and consequently crop enlargement. - Provides bio-available nutrients for optimal intake by plants. - Improves soil properties and fertility Application Charge BioBoost can be applied to the soil by drip irrigation or soil drench. For drip irrigation, dilute 4.5 – 9.0 g (1-2 Tsp.) of product per 1 Gallon (1 Gal.) of water. For soil drench, dilute 4.5 g (1 Tsp.) of product per 1 Gallon (1 Gal.) of water. Irrigate before & after planting to promote active root development of crops. Use 14.3 oz. of product per Acre of application. Do not apply prior to excessive rains, since this may reduce product effectiveness. Avoid application of phosphorus and fungicides during the first two weeks after application. Active Ingredients Charge BioBoost contains high concentrations of Bacillus licheniformis, Bacillus megaterium, Bacillus pumilus, Bacillus subtilis, Trichoderma harzianum, Trichoderma reesei, Glomus etunicatum, Glomus intradices, Glomus mosseae and Glomus aggregatum. Safety & Environmental Info Best land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies(including wells) and any lake, stream, or river. This product is made from naturally derived ingredients and is non-toxic. Mode of Action Charge BioBoost adds essential nitrogen-fixing and phosphorus-solubilizing bacteria and fungi to the soil, so plants only need a fraction of the fertilizer they normally use. If used frequently, Charge BioBoost will increase the amount of bioavailable nutrients and increase the overall fertility of the soil .Crop & Soil HealthBiofertilizersMicrobial Inoculants
  11. Vegalab Cellular Boost product imageVegalabVegalab Cellular BoostNo endorsements yetPrevents Drought-Induced Cracking in Fruits and Vegetables Cellular Boost is a liquid fertilizer that contains unique supplemental nutrients. These nutrients enable plants to vigorously grow chloroplast; thereby improving photosynthesis. The key elements in this product enhance the natural growth of strong cellular membranes in both fruits and vegetables. This product contains essential trace elements that support strong sturdy plant growth. Efficacy - Effective at treating and preventing fruit cracking. - Effective at promoting cellular growth, photosynthesis. Application Use Cellular Boost to effectively prevent the cracking of fruit by adding 3.8 ml (3/4 tsp) of product with one gallon (1 gal) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plants fruiting cycle, respecting the dilution rate of 1:1,000 product to water. After dilution, irrigate the soil around the base of the plant or use as a foliar spray 2 - 3 times to prevent cracking on the fruit. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Cellular Boost's active ingredients are calcium and the trace elements boron and molybdenum. Cellular Boost also contains trehalose, a natural sugar. Safety & Environmental Info This product is made from naturally derived ingredients. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Cellular Boost supplies adequate calcium to enhance the rigidity of cell walls. Since physiological disorders are reduced, crops are able to produce larger quantities of uniform fruits. Trehalose is a natural sugar that dehydrates into a gel. Once absorbed in the plant, the cell organelles are held in place acting as a structural brace when writing and desiccation occurs, preventing cellular destruction. Upon rehydration, the plant regains normal cellular function, providing a resistance to fruit cracking, environmental damage, and harmful diseases.Crop & Soil HealthBiofertilizers
  12. Vegalab Balance Boost product imageVegalabVegalab Balance BoostNo endorsements yetSoil Remediation and Natural Balancing Fertilizer Balance Boost is a product to combat an unbalanced supply of nutrients that may be present in overused or unconditioned soil. Overgrowing can be detrimental to vegetable and fruit production resulting in a reduction of crop yields. Efficacy Effective at correcting nutrient imbalances caused by continuous nitrogen fertilization. Effective at adding natural sugars to the soil to enhance soil microbiota. Application Use Balance Boost when there is too much nitrogen in the nutrient supply by adding 3.8 ml (3/4 tsp) of product to one gallon (1 gal) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plantslife cycle, respecting the Dilution Ratio of 1:1,000; product to water. After dilution, irrigate the soil around the base of the plant or use as a foliar spray 2 to 3 times to balance excess nitrogen. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Balance Boost contains ample amounts of phosphorus and potassium with natural sugars, organic acids, and micronutrients. Safety & Environmental Info This product is made from naturally derived ingredients. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Balance Boost corrects imbalances of excess nitrogen by supplementing the nutrient supply with phosphorus, potassium, secondary nutrients, and micronutrients. It also contains natural sugars in order to enhance the beneficial microflora and the crop itself.Crop & Soil HealthBiofertilizers
  13. Vegalab Micro Boost product imageVegalabVegalab Micro BoostNo endorsements yetMicronutrients with Essential Trace Elements Micro Boost is a liquid fertilizer used to address minor element deficiencies for all crops and to meet a specific nutrient need. This product contains important macro, secondary, and micronutrients that are necessary for healthy, robust plant growth and proper enzymatic function. These essential elements are readily available, through the addition of chelating and complexing agents, for plants that require quick assimilation of micronutrients. Efficacy - Effective at combating micronutrient deficiencies - Effective at promoting fruit set - Effective at improving resistance against plant stress caused by environment, disease, etc. Application Micro Boost is composed of the necessary micronutrients, minor elements, chelating agents, and natural sugars required for robust plants. Active Ingredients Nematode Control uses the natural extract geraniol as the active ingredient to reach the highest level of efficacy, while greatly reducing the environmental impact of using this product. Geraniol is our best recommendation for natural control of plant parasitic nematodes. Safety & Environmental Info Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Micro Boost contains five necessary micronutrients that aid in stress resistance, pollination, and in correcting micronutrient deficiencies. Micro Boost helps the movement of calcium and promotes crop development through the absorption of inorganic nutrients trapped in soil. This allows the plants roots to absorb micronutrients in the soil, alleviating micronutrient deficiencies and physiological disorders. Boron has an important role in the circulation of sugars, primarily saccharose. Copper promotes photosynthesis in plants and is beneficial to building enzymes. Iron takes part in the respiratory processes of the plant and contributes to the formation of proteins. Molybdenum is an essential element in the plants for the synthesis of amino acids from nitrogen absorbed. Zinc acts as an activator of some important functions in plants and participates in the the formation of auxins and growth hormones.Crop & Soil HealthBiofertilizers
  14. Vegalab Color Boost product imageVegalabVegalab Color BoostNo endorsements yetNatural Fruit and Flower Color Enhancer Color Boost enhances the colors of flowers and fruits. It contains macro elements that dictate shorter maturation times during flowering and fruiting, and also promotes better development of fruit set. Color Boost works by stimulating the synthesis of materials responsible for the color and development of flowers. Efficacy - Effective at improving the overall quality of the crop. - Effective at enhancing the flavor and color of fruit and flowers. Color Boost has been proven to improve the quality of crops by enhancing the color and sweetening the flavor of the fruit or vegetable. A proper ratio of phosphorus and potassium shortens the time of maturity during fruiting and also provides for better fruit-set. Application Use Color Boost to enhance the sweetness and color of crops by adding 7.6 ml (1 1/2 tsp) of product with one gallon (1 gal) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plants bloom cycle, respecting the dilution rate of 1:500 product to water. After dilution, use only as a foliar spray 2 - 3 times to achieve better quality fruits. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Color Boost contains the appropriate amounts of phosphorus and potassium responsible for floral and fruit growth. Color Boost contains secondary and minor elements, natural sugars, and amino acids. Safety & Environmental Info This product is made from naturally derived ingredients and is non-toxic. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Color Boost contains proper ratios of phosphorus and potassium to enhance the overall color of the fruits and flowers, resulting in shorter maturation times. The exclusion of nitrogen limits vegetative growth, which can compete with fruit and fruit setting. Secondary and minor elements are also provided along with specific organic compounds to enhance the growth of flowers.Crop & Soil HealthBiofertilizers
  15. Vegalab Pollen Boost product imageVegalabVegalab Pollen BoostNo endorsements yetBiological Bloom Enhancer for Increased Fruit Set Pollen Boost is a pollination promoter that stimulates flower bud differentiation and supplies the necessary nutrients at the time of pollination. It prevents fruit deformation and promotes new shoot development. Pollen Boost contains propolis, which naturally attracts bees to flowers promoting the pollination of crops, and Sargassum spp. seaweed to stimulate production of new flower buds/shoots through auxin-cytokine signaling. Pollen Boost contains macro, secondary and micro nutrients. Efficacy - Effective at improving fruit size and pollen activity. - Effective at aiding in new shoot development. - Effective at aiding in recuperation after abiotic stress. Application Use Pollen Boost during the bloom phase to promote healthy fruit/flower growth and pollination by adding 7.6 mL (1 1/2 tsp.) of product with one gallon (1 gal.) of water to properly dilute, unless otherwise specified in the table below. This product can also be used in other quantities during the plants flowering cycle, respecting the dilution rate of 1:500; product to water. After dilution, use only as a foliar spray 2 to 3 times during the fruiting phase. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Pollen Boost contains a blend of necessary macro and minor elements as well as complexing and chelating compounds, seaweed (kelp), and propolis, a bee attractant. Safety & Environmental Info Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Pollen Boost contains the necessary macro- and micronutrients to aid in pollination of the plant. Phosphorus aids in the ripening and maturation of fruit and potassium promotes cellular growth. The nitrogen enhances the ability for new growth to occur. Pollen Boost maximizes flower and fruit production and encourages new shoot growth by providing bio-stimulants from brown seaweed. Glutamine is classified as an amino acid and improves protein synthesis. Propolis is a natural compound that attracts bees to flowers and enhances the pollination of crops.Crop & Soil HealthBiofertilizers
  16. Vegalab Armour Boost product imageVegalabVegalab Armour BoostNo endorsements yetNatural Silica for Building Strong Resilient Plants Armour Boost is a supplement that provides an easily absorbed silica for plants. Silica is a mineral product supplied to plants as a nutrient that provides rigidity and structural endurance for crops. Silica is known to increase root growth, boosts yield, and enhances crop quality. Efficacy Benefits plant growth, improving crop yields, especially in high silica feeders: cereals, cucumbers, rice and sugarcane. Enhances soil fertility, improves resistance to disease and pests, supports plant architecture, and increases calcium absorption and photosynthesis. Effective towards: - Building resistance to abiotic stress in crops - Promoting active root growth in lawns - Restoring damaged and weakened grass/lawns Application Armour Boost can only be applied as a foliar spray. Use 3.8 ml (3/4 tsp) of product with one gallon (1 gal) of water or 1:1,000 product to water, unless otherwise specified in the table below. After dilution, spray the product onto the plant's leaves. Do not apply prior to excessive rains, since this may reduce product effectiveness. Active Ingredients Armour Boost delivers silica in a solution of potassium silicate that plants can easily absorb. Silicon is a relatively inert element that is considered important to plant and animal life. Safety & Environmental Info This product is made from naturally derived ingredients and is non-toxic. Appropriate land management practices should be used at all times with any fertilizer; this material should be prevented from entering public or private water supplies (including wells) and any lake, stream, or river. Mode of Action Armour Boost is formulated as a premium concentrated silica product derived from a potassium silicate solution. After applying Armour Boost, it is absorbed quickly into the roots and leaves. Being an integral part of the cell walls, silica provides rigidity and structural endurance for crops, adding needed resilience during harsh weather and against harmful pests. The balance amount of Si in the plants boosts photosynthesis and chlorophyll content, and improves drought resistance. lt can also lower irrigation rates, neutralize heavy metal toxicity and counter the negative effects of excess sodium.Crop & Soil HealthBiofertilizers